How to Repair and Replace Kitchen Cabinet Pull Handles

Kitchen cabinet pull handles are an important part of the kitchen’s overall design. They provide a way to open and close the cabinets, and they can also add a touch of style to the kitchen. However, over time, pull handles can become loose, damaged, or outdated. When this happens, it’s important to know how to repair or replace them.

Materials You’ll Need

New pull handles

Screwdriver

Drill

Measuring tape

Level

Step-by-Step Instructions

1. Remove the Old Pull Handles

Use a screwdriver to remove the screws that are holding the old pull handles in place. If the screws are stripped, you may need to use a drill to remove them. Once the screws are removed, pull the old handles straight out of the cabinet doors or drawers.

2. Measure and Mark the New Pull Handle Positions

Use a measuring tape to determine the center of each cabinet door or drawer. Mark the center point with a pencil. Then, use a level to ensure that the new pull handles will be installed straight.

3. Drill Pilot Holes

Use a drill to drill pilot holes for the new pull handles. The pilot holes should be slightly smaller than the screws that you will be using to install the handles.

4. Install the New Pull Handles

Insert the screws into the pilot holes and tighten them with a screwdriver. Be sure to not overtighten the screws, as this could damage the cabinet door or drawer.

5. Clean Up

Wipe away any fingerprints or smudges from the new pull handles. Your kitchen cabinets are now refreshed with new pull handles!

Tips

If you are replacing the pull handles on a cabinet door, be sure to use a pull handle that is the same size as the old one. This will ensure that the door will still open and close properly.

If you are replacing the pull handles on a drawer, you can use a pull handle that is either the same size or a different size. If you use a pull handle that is a different size, you may need to drill new pilot holes.

If you are not sure how to repair or replace kitchen cabinet pull handles, you can always consult with a professional.