How to Install Aluminium Profile Handles on Your Wardrobe

Upgrading your wardrobe with sleek and modern aluminum profile handles is a simple yet impactful DIY project that can enhance the aesthetics and functionality of your storage space. Follow this step-by-step guide to achieve a professional-looking installation:

Gather Materials and Tools

Before starting, ensure you have all the necessary materials and tools:

– Aluminum profile handles

– Screws

– Screwdriver or drill

– Measuring tape

– Pencil or marker

– Level

Determine Handle Placement

The optimal placement of the handles depends on the height of the wardrobe and your personal preference. Here are some guidelines:

– For wardrobes taller than eye level, consider placing the handles about 15-20 inches (38-50 cm) from the bottom and top.

– For shorter wardrobes, adjust the placement to 10-15 inches (25-38 cm) from the bottom and top.

– Use a measuring tape and pencil to mark the desired handle positions.

Mark Screw Holes

Align the handles with the marked positions and gently tap on them to create indents on the wardrobe surface. These indents will indicate the screw hole locations.

– Use a level to ensure the handles are perfectly horizontal.

– Mark the screw hole locations with a pencil or marker.

Drill Pilot Holes (Optional)

For some materials, such as hard or thick wood, it may be helpful to create pilot holes before inserting the screws.

– Use a drill bit slightly smaller than the screw size to create shallow pilot holes at the marked locations.

– This will ensure the screws go in smoothly and without splitting the wood.

Install the Handles

Align the handles over the marked positions and secure them with screws.

– Use a screwdriver or drill to drive the screws into the pilot holes (or directly into the wardrobe material if no pilot holes were made).

– Tighten the screws firmly but avoid overtightening.

– Repeat for all handles on the wardrobe.

Clean Up

Once all the handles are installed, remove any pencil marks or debris from the wardrobe surface.

– Use a damp cloth to wipe away any fingerprints or dust.

– Your upgraded wardrobe with aluminum profile handles is now complete and ready to use!