DIY Projects- Installing Your Own Modern Cabinet Handles

When it comes to home improvement, there are some projects that are best left to the professionals. However, there are also plenty of DIY projects that can be completed by even the most novice homeowner. Installing new cabinet handles is one such project. With a little time and effort, you can give your kitchen or bathroom cabinets a whole new look without breaking the bank.

Materials You’ll Need

Before you get started, you’ll need to gather a few materials. These include:

New cabinet handles

Measuring tape or ruler

Pencil

Screwdriver or drill

Level (optional)

Step-by-Step Instructions

Once you have all of your materials, you can follow these step-by-step instructions to install your new cabinet handles:

1. Measure and mark the holes. Use a measuring tape or ruler to measure the distance between the existing holes in your cabinets. Mark the new holes with a pencil.

2. Drill the holes. If your new handles require new holes, use a drill to drill the holes. Be sure to use a drill bit that is the same size as the screws that came with the handles.

3. Attach the handles. Insert the screws into the handles and tighten them until they are snug. Be careful not to overtighten the screws, as this can damage the handles or the cabinet door.

4. Level the handles (optional). If you want to make sure that your handles are level, use a level to check them before you tighten the screws all the way.

Tips for Success

Here are a few tips to help you ensure that your DIY cabinet handle installation project is a success:

Choose the right handles. When choosing new cabinet handles, be sure to consider the style of your cabinets and the overall decor of your kitchen or bathroom.

Measure carefully. Before you drill any holes, be sure to measure the distance between the existing holes in your cabinets carefully. This will help you ensure that your new handles are installed in the correct location.

Use a level. If you want to make sure that your handles are level, use a level to check them before you tighten the screws all the way.

Don’t overtighten the screws. Be careful not to overtighten the screws that attach the handles to the cabinets. This can damage the handles or the cabinet door.