DIY Installation Tips for Closet Door Pull Handles

Whether you’re revamping your master closet or simply giving your guest room closet a fresh look, installing new pull handles is a relatively simple and inexpensive way to add a touch of style and functionality to your home. With a few basic tools and a little bit of know-how, you can easily install closet door pull handles yourself in just a few hours.

Materials You’ll Need

Before you get started, gather the following materials:

Closet door pull handles

Screwdriver

Measuring tape or ruler

Level

Pencil or marking tool

Step-by-Step Instructions

Follow these steps to install your closet door pull handles:

1. Determine the Handle Placement

Using a measuring tape or ruler, measure and mark the center point of the closet door, both horizontally and vertically. This will be the center of your pull handle.

2. Mark the Screw Holes

Place the pull handle on the door, aligning the center of the handle with the mark you made in the previous step. Use a pencil or marking tool to mark the location of the screw holes on the door surface.

3. Drill Pilot Holes

Use a drill and a bit that is slightly smaller than the screws provided with the pull handles to drill pilot holes at the marked locations. This will prevent the wood from splitting when you insert the screws.

4. Install the Screws

Insert the screws into the pilot holes and tighten them until the pull handle is secure. Make sure the handle is straight and level by using a level.

5. Adjust the Tension

Most pull handles have a tension adjustment screw that allows you to adjust the tightness of the handle. Use a screwdriver to tighten or loosen the screw as needed until the handle has the desired tension.

Expert Tips

For a professional-looking installation, follow these expert tips:

Choose a pull handle that complements the style and finish of your closet door.

Use a level to ensure that the pull handle is installed straight and level.

Tighten the screws securely, but avoid overtightening, as this can damage the pull handle or the door.

If you’re installing pull handles on multiple doors, make sure they are all installed at the same height and spacing for a consistent look.

By following these simple tips, you can easily install closet door pull handles yourself and give your closets a stylish and functional update.