How to Install Modern Closet Door Pulls for a Sleek Look

Upgrading your closet door pulls is a quick and easy way to give your bedroom or dressing room a modern refresh. Whether you’re replacing outdated hardware or adding pulls to doors that never had them before, this guide will walk you through the steps to install modern closet door pulls for a sleek and sophisticated look.

Gather Materials

Before you begin, gather the following materials:

– Modern closet door pulls

– Screwdriver

– Drill (optional)

– Pencil or marking tool

– Level

– Tape measure

Determine Pull Placement

The placement of your closet door pulls will depend on the style of the pulls and the size of the doors. However, a good rule of thumb is to place the pulls about 1/3 of the way down from the top of the door.

To determine the placement, measure the height of the door and divide it by 3. Mark the center point on the door with a pencil. Then, use a level to draw a horizontal line across the door at the center point.

Drill Pilot Holes (Optional)

If you’re using small pulls, you may be able to install them without drilling pilot holes. However, if you’re using larger pulls or if the doors are made of a hard material, it’s recommended to drill pilot holes to prevent the screws from splitting the wood.

To drill pilot holes, use a drill bit that is slightly smaller than the diameter of the screws. Drill holes at the marked center point and at the outer edges of the pulls.

Install the Pulls

Place the pull over the pilot holes and align the screw holes. Use a screwdriver to drive the screws into the door. Be sure not to overtighten the screws, as this can damage the door or the pulls.

Step Back and Admire

Once you’ve installed all of the closet door pulls, step back and admire your handiwork. The sleek new pulls will instantly upgrade the look of your closet and give it a modern touch.

Additional Tips for Installing Closet Door Pulls

– For a more customized look, choose pulls that complement the style of your closet and bedroom.

– If you’re not sure how to install a particular type of pull, consult the manufacturer’s instructions.

– If you’re installing pulls on bifold doors, be sure to align the pulls on both doors so that they open and close smoothly.

– Regularly clean your closet door pulls to keep them looking their best.