DIY Guide to Replacing Kitchen Counter Handles

DIY Guide to Replacing Kitchen Counter Handles: An Easy Home Upgrade

The handles on your kitchen cabinets and drawers are a significant part of the overall design and functionality of your kitchen. They add style and provide a way to open and close cabinets and drawers easily. If you are looking for a quick and easy way to update the look of your kitchen, replacing the counter handles is a great place to start.

Planning the Project

Before you begin, it is important to plan the project. First, decide what style of handles you want. There are many different styles available, so take some time to browse online or in hardware stores to find something that complements your kitchen decor. Once you have chosen the handles, measure the distance between the screw holes on the back of the handle. This will help you determine what size screws you need.

Gathering the Necessary Tools

Replacing counter handles is a relatively simple project that requires only a few basic tools. Here is what you will need:

New counter handles

Screwdriver

Drill

Measuring tape

Pencil

Removing the Old Handles

To remove the old handles, simply unscrew them from the back of the cabinet or drawer. If the handles are stuck, you can use a screwdriver to gently pry them loose.

Installing the New Handles

Once the old handles are removed, you can install the new ones. To do this, follow these steps:

1. Place the new handle over the screw holes on the back of the cabinet or drawer.

2. Screw the handle into place, making sure not to overtighten it.

3. Repeat steps 1 and 2 for all of the handles.

Finishing Touches

Once all of the new handles are installed, you can finish the project by cleaning the cabinets or drawers with a damp cloth. This will remove any fingerprints or smudges.

Tips

If you are replacing handles on a cabinet door, be sure to support the door from the inside before removing the old handles. This will prevent the door from falling.

If you are drilling new holes for the handles, be sure to use a drill bit that is slightly smaller than the screws. This will help to prevent the screws from stripping the holes.

If you are installing new handles on a drawer, be sure to mark the location of the screw holes before drilling. This will help to ensure that the handles are installed evenly.