Safety Tips for Installing Aluminum Cabinet Pulls

Installing aluminum cabinet pulls may seem like a simple task, but there are potential safety hazards that you should be aware of before you begin. By following these safety tips, you can avoid injuries and ensure a successful installation.

Wear Gloves

When installing aluminum cabinet pulls, it is important to wear gloves to protect your hands from sharp edges and splinters. Gloves can also help to prevent skin irritation from contact with the aluminum material. Choose gloves that fit snugly to provide the best protection and allow for dexterity.

Use the Correct Tools

Using the correct tools for the job is essential for safety. You will need a drill, a screwdriver, and a tape measure. Make sure that the drill bit is the correct size for the screws you will be using. If the drill bit is too small, the screws will not hold securely. If the drill bit is too large, the holes will be too big and the pulls will not fit snugly.

Measure Carefully

Before you begin drilling, it is important to measure carefully to ensure that the pulls are installed in the correct location. Use a tape measure to measure the distance between the holes in the pulls and the distance between the pulls and the edge of the cabinet. Mark the locations of the holes with a pencil before you drill.

Drill Pilot Holes

Before you insert the screws, it is important to drill pilot holes. Pilot holes help to prevent the wood from splitting when the screws are inserted. Use a drill bit that is slightly smaller than the diameter of the screws. Drill the pilot holes to a depth that is slightly less than the length of the screws.

Install the Pulls

Once you have drilled the pilot holes, you can insert the screws and tighten them with a screwdriver. Be careful not to overtighten the screws, as this can strip the threads and damage the pulls. Once the pulls are installed, check to make sure that they are secure and that they do not wobble.

Safety Tips

Always wear safety glasses when drilling or driving screws.

Never use a power drill without supervision.

Keep children and pets away from the work area.

Dispose of aluminum shavings and sawdust properly.